Revision as of 14:58, 2 October 2010

The Web Page View Field provides the ability to display a fully formatted document or web page.

In constructing this type of page HTML is used in conjunction with the following variables.

Variable List

Current User

Note: "me" -- refers to the current user

@me.firstname@ will be replaced by current user's firstname

@me.lastname@

@me.email@

@me.phone@

@me.companyname@

UTA Level 1, Sales Opportunity and Job Variables

@name@ - standard field Application Name.

@type@ - standard field Application Template Type.

@status@ - standard field Status

@description@

@requirements@

@currency@

@revenue@

@probability@

@modifieddate@

@closedate@

@startdate@

@enddate@

@jobquestions@ - displays as combo boxes

@jobquestionsr@ - displays question only

@jobskills@

@owner.field@

Example: @owner.fullname@ or @owner.address@

@people.field@

Example: @people.fullname@ or @people.address@

@company.field@

Example: @company.name@ or @company.address@

@company.owner.field@

Example @company.owner.email@

@branch.field@

Example: @branch.name@ or @branch.address@

UTA Level 2 / Activities Variables

@subject@

@description@

@location@

@startdate@

@enddate@

@isallday@

@modifieddate@ (numeric value including time)

@longmodifieddate@ (text value excluding time)

@starthour@ - (0-23)

@starth@ - (0-12)

@startpmam@ - (PM or AM)

@startminute@

@endhour@ - (0-23)

@endh@ - (0-12)

@endpmam@ - (PM or AM)

@endminute@

@owner@

@contact@

@assigned@

@eventid@

@typename@

@objectid@

@objecttype@

@rootcompanyid@

@contact.field@ @eamount@

Example: @contact.firstname@ or @contact.email@

@assigned.field@

Example: @assigned.firstname@ or @assigned.email@

@contact.company.field@ (same as assigned)

Example: @contact.company.address@ or @contact.company.city@

Custom Field Variables

@customfield name@ - by name

or

@#customfield id#@ - by id

Example: @more information@ or @#17342#@

See Also: Invoice Module Variables for Variables specific to the Invoicing module.

UTA Level 1 variables called from UTA Level 2

If your Web Page View is at Level 2, you can call Level 1 variables using:

@parent.fieldname@ or @parent.#fieldid#@ (Note: All field names should be entirely lower case.)

Example: @parent.status@ or @parent.startdate@ or @parent.#12345#@

UTA Level 2 variables called from UTA Level 3

When working at Level 3, you can call Level 2 variables using:

@parent.fieldname@ or @parent.#fieldid#@ (Note: All field names should be entirely lower case.)

UTA Level 1 variables called from UTA Level 3

If your Web Page View is at Level 3, you can call Level ` variables using:

@parent.parent.fieldname@ or @parent.parent.#fieldid#@ (Note: All field names should be entirely lower case.)

Field List

People Fields

firstname, lastname, fullname, title, email, phone, company, address, address2, city, province, state, country, postalcode, owner, modifieddate, cost, costunit, type, resourcename, isrecource, uprefix (prefix), usuffix (suffix), uphoneext (Phone Extension)

Company Fields

name, address, address2, city, province, state, country, postalcode, phone, fax, website

Lead Fields

status, description, name, phone, fax, address, address2, city, state, province, country, postalcode, website, firstname, lastname, contactphone, title, email, dat_added

UTA Contact and Account Variables

Owner:

@owner.fieldname@

Person (Level 1 only):

@people.fieldname@

Assigned (Level 2 only):

@assigned.fieldname@

Company (Level 1 only):

@client.fieldname@

Level 1 Contacts/Accounts

Individual

To display information for a single contact/account in the Level 1 contacts/accounts section:

@contact.rolename.fieldname@   or   @company.rolename.fieldname@

where:

• rolename = the name of the role that has been assigned to the contact/account on the Level One item
• fieldname = the name of the field that is located on the contact's record.

Example:

@contact.adjuster.firstname@ or @company.funding agency.address@

Note: if there is more than one contact/account assigned with the rolename specified, only one will be displayed.

List

To display a list of multiple contacts/accounts in the Level 1 contacts/accounts section:

[#(?object=contact;) ~fieldname~ #] or [#(?object=company;) ~fieldname~ #]

See below for details on how to filter and sort the list(s).

• Note: to display the role that the contact or account is assigned on the Level 1 record use: ~role~

Level 2 Contacts/Accounts

Contacts

To display a list of the contacts assigned at Level 2:

[#(?object=contact;) ~firstname~ ~lastname~ ~email~ #]

Note: Contacts at level 2 cannot be filtered by rolename.

Accounts

To display information for a single account in the Level 2 accounts section:

@companies.rolename.fieldname@

Notes:

• The Account standard field is only available at Level 2 when the Multiple Account list is enabled. See here for details.
• It is not currently possible to display a list of Accounts for Level 2.

To display Level 1 Company Role or Contact Role custom fields

[#(?object=company;)$?opc_customfieldid$#] or [#(?object=contact;)$?opr_customfieldid$#]

where:

• customfieldid = the numeric id of the custom field

Following the same format above, you can also reference custom fields on the company role using the @#field id#@ syntax.

Contact Detail

~uprefix~ ~firstname~ ~lastname~

~uaddress~ ~uaddress2~

~ucity~, ~ustate~ ~upostalcode~

Role Based Custom Fields

When you have a Custom Field such as a Web Page View or MS Word Merge that is located on a User Role or Company Role you can access:

UTA Level 1 Information:

@levelone.fieldname@ or @levelone.customfieldid@

Contact Information:

@contact.fieldname@ or @contact.customfieldid@

Company Information:

@company.fieldname@ or @company.customfieldid@

When you want to refer to a User Role based Custom Field from a UTA Level 1 record use the following syntax: Owner:

@owner.fieldname@

Person:

@people.fieldname@

Contact:

@contact.rolename.fieldname@

where rolename is the role they are assigned on the Level 1 record

To Display a List of Activities, Notes, Transactions, Contacts or Companies

Syntax

[#(?object=objectname;{options})~standardfieldname~ $customfieldname$#]

Where:

• objectname is the name of the item to be listed.

Either: activity, contact, user, company, notes, association, transaction or level-1

• standardfieldname is the name of a standard field (between tildes ~)
• customfieldname is the name of a custom field (between dollar signs $)

Notes:

• You can refer to Custom Fields in the list using the Custom Field ID instead of the field name, still between dollar signs ($12345$)
• level-1 can only be used as an object when referenced from a contact record
• You can include text as well as variables within the [#...#] syntax.
• When using this syntax for Web Page Views, Read Only – System Variables etc. you will usually want to include HTML table formatting within the [#...#] syntax (see examples below). For MS Word Merge custom fields the table defined on the MS Word Template document, with the columns delimited by pipes (|) within the [#...#].
• ~Index~ can be used to number the lines (1, 2, 3...) Note: ~index~ does not work for all lists. For example, it cannot be used when listing contacts associated with a Level 1.

• ~Index~ (upper case 'I') start numbering at 1, ~index~ (lower case 'i') starts numbering at 0.

• ~eventid~ will display the id of the level 2.

Options:

Option	Effect
orderby=standardfieldname	Sorts the list in ascending order by the standard field specified
orderby=standardfieldname desc	Sorts the list in descending order by the standard field specified
orderby=tbl_customfieldid.valuestr	Sorts the list in ascending order by the custom field specified
criteria=standardfieldname='value'	Filters the list by the standard field and value specified
criteria=tbl_customfieldid.valuestr='value'	Filter the list by the custom field and value specified
criteria=(standardfieldname='value' or standardfieldname='value')	For multiple criteria when either conditional criteria can apply
criteria=(standardfieldname='value' AND standardfieldname='value')	For multiple criteria when both conditional criteria must apply

• multiple options can be included, separated by semi-colons (;)

Important: Any custom fields that you use as criteria or orderby must appear in the display. If you do not wish to display the field you can place it in a comment. (i.e.: ≪!--$12343-->)

Examples:

• To generate a list of Level 2 activities for a MS Word Merge:

[#(?object=activity;)|~statusname~|~typename~|$speciality$|$123456$~|#]

See MS Word Merge for further details on including tables on MS Word Merge documents

• To generate a list of all contacts for a Web Page View or Read Only – System Variables custom field (note that the HTML table formatting is included within the [#...#] syntax)

<table><tr><td>First Name</td><td>Last Name</td><td>E-mail Address</td><td>Cell Phone Number</td></tr>
[#(?object=contact;)<tr><td>~firstname~</td><td>~lastname~</td><td>~email~</td><td>$Cell Phone$</td></tr>#]
</table>

Note: The first line creates a header row for the table

• For a list of Level 2 (or Level 3) activities sorted by Start Date in descending order:

 <table>[#(?object=activity;orderby=startdate desc)<tr><td>~subject~</td><td>~location~</td><td>~startdate~</td></tr>#]</table> 

• For a list of contacts assigned to a Level 1 with the role of "Internal People", sorted by surname:

 <table>[#(?object=contact;orderby=lastname;criteria=rolename='Internal People')<tr><td>~firstname~</td><td>~lastname~</td><td>~email~</td></tr>#]</table>

• For a list of all companies that the owner of a UTA record is associated with:

@owner.[#(?object=association;)~name~ (Phone ~phone~)
#]@

• With Multiple Criteria:

[#(?object=contact;criteria=(rolename='External' or rolename='Internal'))<tr><td>~firstname~ ~lastname~</td></tr>#]

• To sort descending by a custom field called Total Hours with a custom field id of 67292:

[#(?object=activity;orderby=tbl_67292.valuestr desc)<tr><td>Subject: ~subject~</td><td>Total Hours: $Total Hours$</td><td>Start Date: ~startdate~</td></tr>#]

Note: $Total Hours$ in the list could be listed as $67292$ with the same result.

• To list a specific activity type only:

[#(?object=activity;orderby=startdate;criteria=typename='This Activity Type')<tr><td>~subject~</td><td>~location~</td><td>~startdate~</td></tr>#]

• To list activities based on the type ID (Level 2 and Level 3 only):

<table>[#(?object=activity;orderby=startdate;criteria=type.statusid='24160')<tr><td>~subject~</td><td>~location~</td><td>~startdate~</td></tr>#]</table>

• To include a hyperlink to the object (for Accounts):

<table>
[#(?object=company;)<tr><td><a target='app_win' href=/s_viewcompany.jsp?companyid=~companyid~>~name~</a></td><td>~role~</td></tr>#]
</table>

• To list activities based on status:

<table>[#(?object=activity;orderby=startdate;criteria=statusname='Open')<tr><td>~subject~</td><td>~location~</td><td>~startdate~</td></tr>#]</table>

• To list activities based on the status ID (Level 2 and Level 3 only):

<table>[#(?object=activity;orderby=startdate;criteria=status.statusid='24160')<tr><td>~subject~</td><td>~location~</td><td>~startdate~</td></tr>#]</table>

• To list notes (from the record that contains the notes):

[@(?object=notes;orderby=createddate desc)<tr><td>~notes~</td><td>~createddate~</td><td>~username~</td></tr>@]

Note: This syntax is for "Public (Default)" notes only, not custom note types.

To list level 2 notes for each level 2 record at level 1:

[#(?object=activity;orderby=startdate desc)
<tr><td>~subject~</td><td>~description~</td><td>~startdate~</td>
<td><table>
[@(?object=notes;orderby=createddate desc)<tr><td>~notes~</td><td>~createddate~</td><td>~username~</td></tr>@]
</table></td>
</tr>#]

Note: This syntax is for "Public (Default)" notes only, not custom note types.

To Format the Start Date or Start Time

~date_format(startdate,'%Y-%m-%d') as startdate~

or

~date_format(startdate,'%h:%i %p') as starttime~

Note:

• If you wish to use "orderby=startdate", along with a date format other than yyyy-mm-dd you must use a slightly different syntax.
• Using "~date_format(startdate,'%d-%m-%Y') as startdate~" when using "orderby=startdate" will cause the date to be ordered by dd-mm-yyyy (rather than yyyy-mm-dd, which is chronological)
• To avoid this, change "date_format(startdate,'%d-%m-%Y') as startdate" to "date_format(startdate,'%d-%m-%Y') as sdate"

Displaying Both Level 2 and Level 3 Activities at Level 1

When displaying a list of Level 2 activities using the [#(?object=activity;)...#] syntax, the corresponding Level 3 activities can be displayed under each of the parent Level 2 activities.

To facilitate this you must create a Read Only - System Variable field at Level 2 that contains the list of Level 3 activities, formatted and filtered as desired.

You can use Visibility Conditions, Role Field Permissions or Status Field Permissions to prevent the field from being displayed on the Level 2 record.

Example:

• Create a Level 2 Read Only - System Variable Custom Field called Level 3 Activity List with the following:

<table> 
     [@(?object=activity;orderby=typename)<tr><td> Level 3 Activity: ~typename~</td><td>~location~</td></tr>@]
</table>

Then create either a Web Page View or Read Only - System Variable at Level 1:

<table>
[#(?object=activity;orderby=startdate)
<tr><td>Level 2 Activity: ~subject~</td><td>~statusname~</td><td>~startdate~</td><td>~enddate~</td></tr>
   <tr><td></td><td colspan=3>$Level 3 Activity List$</td></tr>
#]
</table> 

where "Level 3 Activity List" is the name you gave the Read Only – System Variable field

Level 3s with Less Than 25 Fields

If Level 3 has less than 25 fields it is not necessary to create a Read Only – System Variable Custom Field on the Level 2 that lists the Level 3 activities.

Instead you can use the following syntax within the [#...#] that lists the Level 2 activities:

[@(?object=activity;)~standardfieldname~ $customfieldname$@]

Note:

• This syntax will only work if there are less than 25 fields at Level 3.

Example:

• To display a list of Level 2 activities, including any Level 3 activities under their parent Level 2 activity:

<table>
[#(?object=activity;orderby=startdate)
<tr><td>Level 2 Activity: ~subject~</td><td>~statusname~</td><td>~startdate~</td><td>~enddate~</td></tr>
   <tr><td></td><td colspan=3> 
      <table> 
           [@(?object=activity;orderby=typename)<tr><td> Level 3 Activity: ~typename~</td><td>~location~</td></tr>@]
      </table>
    </td></tr>
#]
</table> 

Displaying a Specific Number of Items in a List

When you want to display only specific number of activities or transactions in a Web Page View use the following syntax.

 [#(?object=object;orderby=field) 
    <!--@sslogic(~index~='num')--> 
       ~standard field~ $custom field$ <br /> 
    <!--@end--> 
  #] <br /> 

where:

• num = number of activities that should be displayed

Note:

• sslogic cannot be used in MS Word Merges

Date/Time Variables

Standard Fields Date/Time

Variable List:

Start Date	End Date	Close Date Level 1 only	Display Format
@startdate@	@enddate@	@closedate@	2009-01-23
@longstartdate@	@longenddate@	@longclosedate@	Friday, January 23, 2009
@fullstartdate@	@fullenddate@	@fullclosedate@	2009-01-23 15:40:00

• Note: Start Time and End Time are stored within the fullstartdate and fullenddate fields respectively. They can be accessed and formatted using the variables elements listed below.

To display specific elements of the Start Date, Start Time, End Date, End Time or Close Date:

@month(fullstartdate)@	month number in Start Date
@monthname(fullstartdate)@	name of month in Start Date
@day(fullstartdate)@	day in Start Date
@dayweek(fullstartdate)@	name of day in Start Date
@year(fullstartdate)@	year in Start Date
@hour(fullstartdate)@	hour in Start Time using 12 hour clock (0-12)
@ampm(fullstartdate)@	AM or PM reference for Start Time
@hour24(fullstartdate)@	hour in Start Time using 24 hour clock (0-24)
@minute(fullstartdate)@	minute in Start Time

Note: For End Date or Close Date replace fullstartdate with either fullenddate or fullclosedate respectively.

(seconds are not available for standard date/time fields)

(Close Date does not have a time associated with it)

Examples:

• To display the Start Date in the format February 22, 1985 you would use:

@monthname(fullstartdate)@ @day(fullstartdate)@, @year(fullstartdate)@

• To display the End Time in the format 06:45PM you would use:

@hour(fullenddate)@:@minute(fullenddate)@@ampm(fullenddate)@

Current Date/Time

Variable List:

Variable	Content	Display	Comment
@currentdate@	current date	2009 January 25
@now@	current date and time	2009 August 25 11:05AM	Workflows only. Not available within UTAs

To display specific elements of the current date or time:

@month(currentdate)@	current month number
@monthname(currentdate)@	name of current month
@day(currentdate)@	current day
@dayweek(currentdate)@	name of current day
@year(currentdate)@	current year
@hour(currentdate)@	current hour using 12 hour clock (0-12)
@ampm(currentdate)@	AM or PM reference for current time
@hour24(currentdate)@	current hour using 24 hour clock (0-24)
@minute(currentdate)@	current minute

(seconds are not available for the current time)

Examples:

• To display the current date/time in the format Friday at 19:55 you would use:

@dayweek(currentdate)@ at @hour24(currentdate)@:@minute(currentdate)@

Custom Fields Date/Time

You can parse out a particular date/time in a date field:

@month(fieldname)@	month number in fieldname
@monthname(fieldname)@	name of month in fieldname
@day(fieldname)@	day in fieldname
@dayweek(fieldname)@	name of day in fieldname
@year(fieldname)@	year in fieldname
@hour(fieldname)@	hour in fieldname using 12 hour clock (0-12)
@ampm(fieldname)@	AM or PM reference for time in fieldname
@hour24(fieldname)@	hour in fieldname using 24 hour clock (0-24)
@minute(fieldname)@	minute in fieldname
@second(fieldname)@	second in fieldname

Examples:

• To display the custom field Date Of Birth in the format 31-01-2001 you would use:

@day(date of birth)@-@month(date of birth)@-@year(date of birth)@

Miscellaneous Variables

Adding a File Upload button

To display a button to upload to a Single File or Multiple Files custom field:

• Single File:

<input type=button class=Button value='Button Label' onclick="x_uploadfile(customfieldid,-1,'@codedid@')" />

• Multiple Files:

<input type=button class=Button value='Button Label.' onclick="x_uploadfolder(customfieldid,'@codedid@')" />

where:

• customfieldid = the field id of the Single or Multiple file custom field (without cf_)

Example:

<input type=button class=Button value='Multiple files...' onclick="x_uploadfolder(customfieldid,'@codedid@')" />

Note: if adding to a Web Page View you will need to add the following to the page:

function include_dom(script_filename) {
    var html_doc = document.getElementsByTagName('head').item(0);
    var js = document.createElement('script');
    js.setAttribute('language', 'javascript');
    js.setAttribute('type', 'text/javascript');
    js.setAttribute('src', script_filename);
    html_doc.appendChild(js);
    return false;
}
function includejsfiles() {
  include_dom("/validate.js");
}

You will also have to call the includejsfiles function in the body onload:

<body onload="includejsfiles();">

Displaying a Dynamic Data Grid field

To show a Dynamic Data – Data Grid field in a webpage view field use the following syntax:

@fieldname.table@

Retrieving History for Fields with Track Changes Enabled

The following syntax is used to retrieve custom field history:

For the Status standard field:

@HistoryOf(status)@

For a Custom Field:

@HistoryOf(customfieldid)@

(The field name is not accepted in this case.)

Notes:

• HistoryOf is case sensitive.
• You can only obtain the history of the Status field and Custom Fields in this way.

Controls

Hide a variable if it is missing

Put the following in front of variable name.

<!--hideifnotfound-->

Example:

  <!--hideifnotfound-->@parent.contact.adjuster.email@

Note: the <!--hideifnotfound--> and the variable must be in immediate succession, and not separated by a space.

How to display different content based on a value using SSlogic

To display content based on a value from a variable add <!--@sslogic('@branch.name@'='Internal Staff')--> in front of the content and <!--@end--> at the end of the content. If there are 2 different pieces of content to be displayed based on a value and all others add <!--@else--> between the 2 pieces of content.

<!--@sslogic(CONDITION)-->
   The content to be displayed when condition is true.
   This can be more than one line.
<!--@end-->

• The content to be displayed (the middle line) can either be in plaintext or in HTML.
• Be sure there are single quotes around the variable and value.
• SSlogic does not support nested logic statements.

Example:

• The following will display a Christmas tree image if the month is December:

<!--@sslogic(month(now())=12)-->
   <img src='images/xmasstree.jpg'>
<!--@end-->

See SSlogic for more information and further examples.

How to display check boxes in the Web Page View

To display Select Many - Check Box type custom fields as check boxes in a web page view add @checkbox('fieldname/fieldnumber','option name')@ to the check box control.

This syntax works if the check boxes are on the same level. or

Example:

<input type="checkbox" @checkbox('12345','yes')@>

See Also: Updateable Web Page View Fields if you wish the Web Page View check boxes to have the ability to change the underlying data.

How to display level two check boxes on level one in the Web Page View

@checkboxvalue(id||values to be checked)@

<input type="checkbox" name="checkboxb20" value="Limited community support"  @checkboxvalue($1199639$||Limited community support)@>

• Use two "|" (pipes) to separate id and value to be checked

where 1199639 is customfield id if it is used on the same level @1199639@ if it is used on the child level $1199639$

This works for level one check boxes on level one web page view AND works for level two check boxes on level one web page view AND works for level three check boxes on level one web page view

How to suppress the Page Footer with Printing the Page

To suppress the footer when printing the page you need to change your browser settings.

Internet Explorer

1. Choose the File Page Setup menu.

2. Delete the Header and Footer text.

3. If required, change the margins.

FireFox

1. Choose the File Page Setup menu.

2. Click the Margins & Header/Footer tab.

3. Set all Header and Footer options to Blank.

3. If required, change the margins.

How to control print behavior

To define a page break place the following code in the HTML source before the content you deem as the next page:

<div style="PAGE-BREAK-AFTER: always"><br style="height:0; line-height:0"></div>

To change the page orientation to landscape first place the following in the header portion (<head></head>) of the HTML:

<style type="text/css" media="print">
div.page  { 
writing-mode: tb-rl;
height: 80%;
margin: 10% 0%;
margin-right: 80pt;
filter: progid:DXImageTransform.Microsoft.BasicImage(Rotation=1);
}
</style>

<div class="page"></div> 

<div class="page">This is the page content that needs to be in landscape</div>

Please note that the page orientation control only works with Internet Explorer and is not the greatest quality print due to the page being converted to an image then rotated.

How to control print behavior when saving as a PDF

To define a page break in a PDF add <pd4ml:page.break/> before the content you deem as the next page.

To change the orientation of a page to landscape in a PDF add <pd4ml:page.break pageFormat="rotate"> before the content you deem as the next page.

Troubleshooting

• Issue: 2 variables run together (thus removing the ending @ and beginning @)
• Resolution: Place a non-breaking space tag (&nbsp;) between the variables.

• Issue: For a list of level 2 activities, the code is showing instead of the field headings and values you've designated.
• Resolution: Insert a comment tag before the first cell tag. i.e.

  <tr><!--~index~--><td>

See Also

• sslogic
• ssattach
• sscalculation
• Web Page View Field
• Attach a PDF to a Web Page View
• Updateable Web Page View Fields
• Changing the Status from a Web Page View
• Custom Field Type: Display Only – Web Page View