Difference between revisions of "Single Sign-On"

Revision as of 13:31, 23 January 2023

Overview

SmartSimple provides Single Sign-On (SSO) integration through SAML 2.0. It should be noted that SSO is just a subset of federated identity management, as it relates only to authentication, and not account management or synchronization with SmartSimple.

Implementation of SSO requires configuration both within SmartSimple and within the system that will provide the authentication.

SmartSimple's implementation of SSO acts as the Service Provider and assumes the client has the infrastructure and resources to host, configure, and manage the Identity Provider service. Please contact your account manager or SmartSimple Support for further information.

SAML 2.0

SmartSimple supports SAML (Security Assertion Markup Language) 2.0 as the Service Provider through our own proprietary implementation of this standard.

Identity Provider-initiated authentication is supported, meaning the end user will first authenticate on the client-side system/infrastructure and then be forwarded to SmartSimple. The client Identity Provider service will construct a base64-encoded SAML assertion and send this to the user's browser. The user's browser will then relay this assertion to the SmartSimple server for SSO authentication.

After the November 2022 upgrade, Service Provider-initiated authentication is now supported. The Service Provider sends the SAML Authorization Request message and forwarding the user to the client Identity Provider service for authentication. The end user will login from the client-side Identity Provider. After the end user has been authenticated, the client Identity Provider service will redirect them back to the SmartSimple instance along with a base64-encoded SAML assertion response. The user's browser will then relay this assertion to the SmartSimple server for SSO authentication.

Prerequisites

• You must provision your own Identity Provider service, third-party or otherwise, for use with this feature. Enabling and maintaining the Identity Provider is your responsibility.
• You must provide SmartSimple with a public key in base64-encoded X.509 Certificate format for digital signature validation.

Service Provider Configuration - SmartSimple

Within SmartSimple, SSO settings are accessed through the Global Settings → Integration tab.

Navigating to the SSO configuration.

You will be redirected to the List View of the SSO configuration page. Click on the “+” icon to create a new SSO configuration on the instance:

SSO configuration settings.

Mandatory Settings

• SSO Alias - used to identify the SSO connection and should be configured by default to be 'SAML2'. If multiple SSO connections are to be configured then you may include an additional element on the client-side assertion named 'SSOModule' to specify the SmartSimple connection by matching a unique "SSO Alias" value.
• Unique Identifier Field (UID) - used to identify the user account and needs to be an attribute that is unique to each user in SmartSimple. The value for the attribute "NameID" from the SSO assertion should match the value from the field selected in the dropdown list.(typically e-mail address or employee ID).
• X509Certificate (SAML2 Only) - the signing certificate to be provided by the client. The formatting of this should be the certificate value without the "begin certificate" and "end certificate" header and footer lines. Also, depending on how the client-side system sends this value within the SAML assertion the certificate value will typically be formatted to just a single line but could also be multiple lines and so must be entered into SmartSimple in the same format.
• Timestamp Time Zone - used to read the incoming SSO message timestamp from Identity Provider configured time zone.  Default value is "--UTC/GMT--". Settings will need to be adjusted when the error "SAML response expired" is found in the log file during debug mode.
• Third-Party Identity Provider- specify what SSO authentication method is used  (Identity-Provider initiated  or  Service Provider-initiated)
  • Endpoint - specify the redirect IdP-initiated or SP-Initiated endpoint.  This redirect will be rendered in the Login Page.
• It is also recommended to disable the Session Timeout Alert setting within the Global Settings → Security section as that feature would not be applicable to users logged in through single sign-on.
• By default, SSO acts as an additional method of authentication. If you wish to enforce the use of SSO, and restrict the regular username and password authentication, you can do so with the Global Settings → Integration → Enforce SSO setting which allows you to restrict a set of user roles to only be able to login through SSO.

Additional Settings

To enable adding new users/organizations, the following Options should be enabled:

• Bypass Two Factor Authentication - Bypass Two Factor Authentication when logged in with SSO
• Enable Debug Mode - When enabled, it ignores the SSO time stamp and output SSO assertion message in the Congifuration Error Log

• Default Landing Page - used to specify an initial landing page within SmartSimple instance. This should be a relative path (e.g. /iface/ex/ax_index.jsp).

• Logout Redirect URL - redirect url when SSO users logout
• Enable Logout Assertion - will send a logout assertion to the Identity Provider to log out of that session

Additional settings for Enable Logout Assertion:

Assertion Target URL - target site url

Assertion Private Key - private key to establish connection with the target site.

User Creation Option

When users need to be created on the fly after SSO authentication, the following configuration settings are available:

• Create New User on No Match– when enabled, it will create new user when no matching is found and will allow login for new user upon successful authentication
• Define User Roles Through Custom Attribute– when enabled, it will use the SSO assertion “Roles” attribute to define users’ system roles.
• Default User Role When No Matching Role Found *– selected role from this dropdown will be assigned to new created users only if “Roles” attribute in the assertion is empty, excluded or if the role name value does not match any existing role in your SmartSimple instance.
• Default New User Status – assigned user’s status for new users only
• Create New Organization When No Match Found – when enabled, it will create a new parent organization when no matching organization exists your SmartSimple instance.
• Default Organization *– assigned user’s parent organization for new users
• Default New Organization Status– assigned parent organization’s status for new organizations

* - mandatory fields when creating users thru SSO.

SSO User Creation Settings.

Role Mapping

Apply Role Mapping to new and existing users to control user roles within your SmartSimple system. Define the list of system roles you wish to be monitored upon each SSO authentication by a user. With external role mapping enabled, a user's roles within the system will be adjusted according to the role attributes explicitly provided by the assertion. Based upon the role mapping below, the user will be provisioned with all the roles as defined by the assertion attributes, and will also be stripped of any roles that they may currently possess that are listed in this setting but were not defined in the assertion attributes system.

• Roles to be Monitored – define the list of system roles you wish to be monitored upon each SSO authentication by a user
• Mapping – map all roles indicated above to the external role name from the client Identity Provider service

Detailed expected behaviour of this settings can be found in Section 4

Multi Environment Support

When you have multiple environments with unique SSO configurations (such as production, testing, development and backup), group them under the same MES group identifier. This will give you a consistent configuration of your login page across multiple environments. The system will then detect and render the appropriate SSO login link using the MES Environment Identifier.

• MES Group Identifier – assign the same MES Group Identifier name to the SSO configuration for your development, production, testing and backup environments.
• MES Environment Identifier – enter the domain of the SmartSimple environment that will display tis SSO service endpoint on the login page i.e. alias.smartsimple.com or  alias.smartsimplebk.com

Additional settings to be configured is from the main login page (Waffle → Global Settings → Branding → Login Pages) under the Single Sign-On section, select the MES Group Identifier from the dropdown list, and add button label i.e. Employee Login.

Optional Attibutes

The following optional attributes can be used in the assertion. Please note that they are case sensitive and should be labelled exactly.

• SSOModule - used to specify the SmartSimple SSO connection when there are multiple connections configured.
• Email
• First name
• Last name
• Department - used to update the user's organization. This will attempt to match an organization by name and will move the user to that organization if found.
• Roles - used to update the user's roles in SmartSimple for new users. This should be a comma delimited list of SmartSimple user roles (by name) to be assigned to the user.
• Language - used to specify the initial language displayed to the user. This should be an integer value that corresponds with a language ID value in SmartSimple (e.g. 1=English).

Identity Provider Configuration - Client-Side System

The elements required for setup of the client-side identity provider connection are listed below.

• Unique user identifier - within the SAML assertion, this value can be sent in the standard element: "NameID"
• Assertion Consumer Service URL - this will be equal to '/SAML2/' appended to your SmartSimple instance URL, e.g. https://alias.smartsimple.com/SAML2/.
• Service Provider's Entity ID - this can be the URL to your SmartSimple system, e.g. https://alias.smartsimple.com/.
• Service Provider metadata XML - the following is an example service provider metadata that can be used, however you must first replace every instance of 'alias.smartsimple.com' instead with the URL to your SmartSimple system.

<?xml version="1.0"?>
<md:EntityDescriptor xmlns:md="urn:oasis:names:tc:SAML:2.0:metadata" xmlns:ds="http://www.w3.org/2000/09/xmldsig#" entityID="https://alias.smartsimple.com/">
   <md:SPSSODescriptor AuthnRequestsSigned="false" WantAssertionsSigned="true" protocolSupportEnumeration="urn:oasis:names:tc:SAML:2.0:protocol">
      <md:NameIDFormat>urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified</md:NameIDFormat>
      <md:AssertionConsumerService Binding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" Location="https://alias.smartsimple.com/SAML2/" index="1"/>
   </md:SPSSODescriptor>
   <md:ContactPerson contactType="technical">
      <md:GivenName>SmartSimple Support</md:GivenName>
      <md:EmailAddress>support@smartsimple.com</md:EmailAddress>
   </md:ContactPerson>
   <md:ContactPerson contactType="support">
      <md:GivenName>SmartSimple Support</md:GivenName>
      <md:EmailAddress>support@smartsimple.com</md:EmailAddress>
   </md:ContactPerson>
</md:EntityDescriptor>

Active Directory Federation Services (ADFS)

If using ADFS refer to the below steps as related to SmartSimple for setup. Some steps unrelated to your SmartSimple configuration have been omitted.

• Add a new "Relying Party Trust".
• "Select Data Source" - Import the Service Provider metadata XML file obtained from SmartSimple.
• "Display Name" - Give the trust a display name, e.g. 'SmartSimple'.
• Finish the setup, and then return to the "Claim Rules" editor, and select the "Issuance Transform Rules" tab and add a new rule. Set the "Rule Type" to use the 'Send LDAP Attributes as Claims' template and configure the mapping to the agreed upon user identifier (e.g. LDAP attribute 'E-Mail-Addresses' to Outgoing Claim Type 'NameID'). Depending on your ADFS version and setup you may instead need to create two rules, one to map the attributes E-mail to E-mail, and then a second rule to transform the E-mail to the outgoing NameID.
• To test or use this connection use your internal ADFS URL and specify the loginToRp parameter as the SmartSimple SAML entity ID, e.g. https://adfs.yourlocaldomain.com/adfs/ls/idpinitiatedsignon.aspx?loginToRp=https://alias.smartsimple.com/.
  If you aren't automatically redirected into SmartSimple you may need to have RelayState enabled in ADFS, and then use a RelayState parameter to achieve this, e.g. https://adfs.yourlocaldomain.com/adfs/ls/idpinitiatedsignon.aspx?RelayState=RPID%3Dhttps%3A%2F%2Falias.smartsimple.com%2F%26RelayState%3Dhttps%253A%252F%252Falias.smartsimple.com%252F.

Azure Identity Provider

Configuration items listed are specifics SSO to work in SmartSimple:

• Log into Azure as admin
• Go to Azure Active Directory → Enterprise Application → Create a new application
• Select Non-Gallery Application and then add your new application, enter the name of your application i.e. "SmartSimple SSO" and then press ADD
• Select Single Sign-ON and then select SAML

Basic SAML Configuration:

Identifier (Entity ID): https://alias.smartsimple.com 

Reply URL (Assertion Consumer Service URL): https://alias.smartsimple.com/SAML2/

• User Attributes & Claims

1. Required claim

Unique User Identifier (Name ID): this can be the user.mail or user.employeeid or any unique identifier in the user profile fields

2. Additional claims - additional attributes are needed when user will be created on the fly

First name: user.givenname

Last name: user.lastname

Email: user.mail

Department: user.department

Roles: user.assignedroles

SSOModule: constant value that is going to be used in the SmartSimple configuration "SSO Alias"

Note that all attribute names are case sensitive and should be named as indicated above.  First name, Last name and Email are mandatory to create a new user. 

• To test, go to Single sign-on, click on Test this application from the tab header. Select "Sign in as current user" and click on the Test sign in button. Please make sure that the current user is existing in the SmartSimple instance to have a successful SSO login.

After configuration has been completed, provide the following to SmartSimple:

1. x509 certificate - download the Federation Metadata XML (Found under Single Sign-on  →  SAML Certificates)
2. Value used for the NameID - this will be used as the identifier between SP and IdP
3. URL Redirect
   • "User Access URL" for IdP-initiated SSO (Found under "Properties")
   • "Logon URL" for SP-initiated SSO (Found under Single Sign-on  →  Set up 'Application Name')

OKTA

• Log in to OKTA admin account
• Click on the Application tab and select Applications.
• Click on the Add Application button and click on Create New App to create a new application for SmartSimple.
• Set the Platform as Web, the Sign on method as SAML 2.0 and Create a new application.
• In the General Settings page, provide a name for the application i.e. SmartSimple SSO
• In the Configure SAML tab, under SAML Settings, 
  • Single sign-on URL:     https://alias.smartsimple.com/SAML2/
    • check on the tick box: Use this for Recipient URL and Destination URL
  • Recipient URL:     https://alias.smartsimple.com/SAML2/
  • Destination URL:     https://alias.smartsimple.com/SAML2/     
  • Audience URI  (SP Entity ID):     https://alias.smartsimple.com/SAML2/
  • Default RelayState: 
  • Name ID format: EmailAddress
  • Application username: Email
• Configuration Settings below have default value: 
  • Update application username on: Create and update
  • Response:     SIgned
  • Assertion Signature:     Signed
  • Signature Algorithm  RSA-SHA256
  • Digest Algorithm:    SHA256
  • Assertion Encryption:     Unencrypted
• Attribute Statements
  • First name:  user.firstName
  • Last name:   user.lastName
  • Email:  user.email
  • Department
  • Roles
  • SSOModule

Note that all attribute names are case sensitive and should be named as indicated above. First name, Last name and Email are mandatory to create a new user.

After configuration in OKTA has been completed, provide the following to SmartSimple:

1. x509 certificate - found under Sign On tab, SAML Set up "View SAML set up instructions"
2. Value used for the NameID - this will be used as the identifier between SP and IdP
3. URL Redirect - "Embed Link" for IdP-initiated SSO (Found under "General" tab in the "App Embed Link" Section)

SAML Assertion Example

The following is an example of a SAML Assertion :

<?xmlversion="1.0" encoding="UTF-8"?>
<samlp:Response xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol" Destination="https://alias.smartsimple.com/SAML2/" IssueInstant="2014-07-12T14:17:03.063Z" ID="BYavZkuNtRHC5rEPhIAEQrys1Wb" Version="2.0">

   <saml:Issuer xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion">sso:saml2:alias:stage:SmartSimple:idp</saml:Issuer>

   <ds:Signature xmlns:ds="http://www.w3.org/2000/09/xmldsig#">
      <ds:SignedInfo>
         <ds:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
         <ds:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1"/>
         <ds:Reference URI="#BYavZkuNtRHC5rEPhIAEQrys1Wb">
            <ds:Transforms>
               <ds:Transform Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature"/>
               <ds:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
            </ds:Transforms>
            <ds:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1"/>
            <ds:DigestValue>+2uvXQh+d65mNWs0G6FBf4igIxU=</ds:DigestValue>
         </ds:Reference>
      </ds:SignedInfo>
      <ds:SignatureValue>LEOCPec/eNBMqBV7A99...</ds:SignatureValue>
   </ds:Signature>

   <samlp:Status>
      <samlp:StatusCodeValue="urn:oasis:names:tc:SAML:2.0:status:Success"/>
   </samlp:Status>

   <saml:Assertion xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion" Version="2.0" IssueInstant="2014-07-12T14:17:03.246Z" ID="X14MvZtPaqyUjfFCbehto32uDTG">
      <saml:Issuer>sso:saml2:alias:stage:SmartSimple:idp</saml:Issuer>
      <saml:Subject>
         <saml:NameID Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified">T5014CD</saml:NameID>
         <saml:SubjectConfirmation Method="urn:oasis:names:tc:SAML:2.0:cm:bearer">
            <saml:SubjectConfirmationData NotOnOrAfter="2014-07-12T14:22:03.246Z" Recipient="https://alias.smartsimple.com/SAML2/"/>
         </saml:SubjectConfirmation>
      </saml:Subject>
      <saml:Conditions NotOnOrAfter="2014-07-12T14:22:03.246Z" NotBefore="2014-07-12T14:12:03.246Z">
         <saml:AudienceRestriction>
           <saml:Audience>sso:saml2:alias:stage:SmartSimple:sp</saml:Audience>
         </saml:AudienceRestriction>
      </saml:Conditions>
      <saml:AuthnStatement AuthnInstant="2014-07-12T14:17:03.246Z" SessionIndex="X14MvZtPaqyUjfFCbehto32uDTG">
         <saml:AuthnContext>
           <saml:AuthnContextClassRef>urn:oasis:names:tc:SAML:2.0:ac:classes:unspecified</saml:AuthnContextClassRef>
         </saml:AuthnContext>
      </saml:AuthnStatement>
      <saml:AttributeStatement xmlns:xs="http://www.w3.org/2001/XMLSchema">
         <saml:Attribute NameFormat="urn:oasis:names:tc:SAML:2.0:attrname-format:basic" Name="Email">
            <saml:AttributeValue xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xs:string">david@email.com</saml:AttributeValue>
         </saml:Attribute>
         <saml:Attribute NameFormat="urn:oasis:names:tc:SAML:2.0:attrname-format:basic" Name="First name">
            <saml:AttributeValue xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xs:string">David</saml:AttributeValue>
         </saml:Attribute>
         <saml:Attribute NameFormat="urn:oasis:names:tc:SAML:2.0:attrname-format:basic" Name="Last name">
            <saml:AttributeValue xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xs:string">Smith</saml:AttributeValue>
         </saml:Attribute>
         <saml:Attribute NameFormat="urn:oasis:names:tc:SAML:2.0:attrname-format:basic" Name="Department">
            <saml:AttributeValue xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xs:string">Shipping</saml:AttributeValue>
         </saml:Attribute>
         <saml:Attribute NameFormat="urn:oasis:names:tc:SAML:2.0:attrname-format:basic" Name="Roles">
            <saml:AttributeValue xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xs:string">Clerk</saml:AttributeValue>
         </saml:Attribute>
      </saml:AttributeStatement>
   </saml:Assertion>

</samlp:Response>

SAML Authorization Request Example

Example below is sent by the Service Provider (SmartSimple) to the Identity Provider in the SP-SSO initiated flow.

 
 <?xml version="1.0" encoding="UTF-8"?>
 <samlp:AuthnRequest xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol" xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion" AssertionConsumerServiceURL="https://alias.smartsimpleqa.com/SAML2/" Destination="https://adfs.yourlocaldomain.com/adfs/ls/spinitiatedsignon" ID="alias.smartsimple.com_QADEV_6CD95AEAD41525F565318B82A46B022E" IssueInstant="2023-01-05T13:56:36Z" ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ProviderName="aliasname" Version="2.0">
	<saml:Issuer>https://alias.smartsimple.com</saml:Issuer>
	<samlp:NameIDPolicy AllowCreate="true" Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified"/>
	<samlp:RequestedAuthnContext Comparison="exact">
		<saml:AuthnContextClassRef>urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport</saml:AuthnContextClassRef>
	</samlp:RequestedAuthnContext>
</samlp:AuthnRequest>

Troubleshooting

In order to retrieve information about why SSO is failing, first toggle the "Debug Mode" option within the SSO configuration in SmartSimple, and then test the SSO in order to generate log data within the Configuration Error Log.

• SAML failed. No user account found

This means that a corresponding active user was not found in the SmartSimple instance. Check the [Unique Identifier Field] that is configured in the SSO setting, and then compare the value of the "NameID" node sent within the SAML assertion to see if a user with that field value exists in SmartSimple. Check that the user is activated and allows login.

• SAML failed. Login session is null

Check that a matching user account exist

Check x509 certificate

Verify that the endpoint in the SSO assertion is correct. There should be a Response node with a parameter like Destination="https://alias.smartsimple.com/SAML2/"

• SAML signature validation failed

This means that the x509 certificate does not match between the SAML Assertion and the value configured in the instance SSO settings.

• SAML response expired

Check the datetime value of the parameter named NotAfter and NotBefore within the SAML Assertion and compare these with the expected datetime that the assertion was sent. It is possible to adjust the Timestamp Time Zone dropdown settings.

• Invalid response format. Unparseable date.

Check that the SAML Assertion contains both parameters: NotAfter and NotBefore

• SAML processing error

Check that the value for the SSO Alias is "SAML2" for SSO in production instance

If it is for a Multi Environment, value in the SSO Alias should be the value in the attribute SSOModule

• No log file is found in SmartSimple

Verify the parameter: Destination="https://alias.smartsimple.com/SAML2/" from the SSO Assertion.

Check that the value for the SSO Alias is "SAML2" for SSO in production instance.

If it is for a Multi Environment, value in the SSO Alias should be the value in the attribute SSOModule

• After logging thru SSO, you are redirected to "mesagetype=30"

Verify that the alias of the instance is correct. To verify the alias, go to Waffle → Global Settings → Branding → Web Alias. Make sure that the Web Alias value is the same as the domain alias.

• SAML InReponseTo does not match any of the possible Request IDs

Verify the alias of the instance is correct.

Verify that the SSO configuration for multiple environment do not have duplicate MES Environment Identifier.

Expected Behaviour for Role Mapping

Scenerio 1:  User Access Mapping set to Disabled / Create New User on No Match is OFF

• User will not be created if user does not exist in the SmartSimple instance
• Only existing users in the SmartSimple instance will be able to login and no role/status updates for existing users

Scenerio 2:  User Access Mapping set to Disabled / Create New User on No Match is ON  

• User will be created with default new user role / default new user status settings if users does not exist in the SmartSimple instance
• No role updates based on default new user role / default new user status if user exists

Scenerio 3:  User Access Mapping set to Enabled / Create New User on No Match is OFF / No Assertion defined  

• User will not be created if user does not exist in the SmartSimple instance
• No role updates if accessing SSO with existing users

Scenerio 4:  User Access Mapping set to Enabled / Create New User on No Match is OFF / Assertion is defined  

• User will not be created if user does not exist in the SmartSimple instance
• No role updates if accessing with existing account
• No role updates if it is not referenced in the defined assertion
• Role updates if accessing with existing account only if they are defined in the User Roles Assertion Mapping. Role update will be based on the mappings defined under Mapping.

Scenerio 5:  User Access Mapping set to Enabled / Create New User on No Match is ON  / No Assertion defined

• User will be created with default new user role / default new user status settings if user does not exist in the SmartSimple instance
• No role updates if accessing with existing account that does not have roles defined in the User Roles Assertion Mapping

Scenerio 6:  User Access Mapping set to Enabled / Create New User on No Match is ON / Assertion is defined  

• User will be created with roles defined in the assertion if user does not exists in the SmartSimple instance and assertion roles are defined in the User Roles Assertion Mapping
• User role updates based on the defined assertion if accessing with existing accounts that has roles defined in the assertion
• No role updates if accessing with existing accounts that has no roles defined in the assertion or if roles in assertion was not mapped in the User Roles Assertion Mapping

Scenerio 7:  User Access Mapping set to Classic Mode / Create New User on No Match is ON  / No Assertion is defined

• User will be created with default new user role / default new user status settings if user does not exist in the SmartSimple instance
• No role updates if accessing with user account that already exists in the SmartSimple instance

Scenerio 8:  User Access Mapping set to Classic Mode / Create New User on No Match is ON  / Assertion is defined

• User will be created with roles defined in the assertion if user does not exist in the SmartSimple instance and assertion roles are defined in the User Roles Assertion Mapping
• User will be created with default new user role / default new user status settings if user does not exists in the SmartSimple instance and if assertion roles do not exist in the User Roles Assertion Mapping
• When Access Mapping is set to Classic Mode and there is no mapping section, role updates will only happen in user creation and the roles in assertion has to have the same user role names matching value with the SmartSimple role names. 

Example SSO configuration in SmartSimple

Configuration for SSO in production instance

Configuration below is for SSO Login within the client's SmartSimple production instance.

SmartSimple SSO configuration as the Service Provider

A. SSO Configuration

1. Navigate to Global Settings → Integrations tab → Single Sign-On section

2. Click on the “+” icon to create a new SSO configuration on the instance

3. Fill out the mandatory fields:

SSO Alias: SAML2 (default alias for production instance)

Signing Certificate (X.509): cut and paste the x509 certificate after configuration of the client's Identity Provider

Timestamp Time Zone: --UTC/GMT-- (default from the dropdown)

MES Group Identifier: SSOProd (open text field)

MES Environment Identifier: alias.smartsimple.com (client's url production instance)

Method: Identity Provider-initiated (default setting)

Identity Provider Service Endpoint: this is the url login redirect.

For Azure, the value in User Access URL (Found under Properties)

For OKTA, the value in Embed Link (Found under General tab in the App Embed Link Section)

For ADFS, the redirect is https://adfs.yourlocaldomain.com/adfs/ls/idpinitiatedsignon.aspx?loginToRp=https://alias.smartsimple.com/

Unique Identifier FIeld (UID): from the dropdown, select *E-Mail (Default value but it can also be the Employee ID or any unique identifier in the user profile)

Bypass Multi-Factor Authentication (MFA): enabled

4. Click Save

B. Login Page Configuration

1. Navigate to Global Settings → Branding tab → Login Pages section

2. From the Primary tab, click on the pencil icon for the first item on the list view - the default Login Page

3. From the General tab, go to the Single Sign-On section and complete fields:

MES Group Identifier: from the dropdown, select SSOProd

Link Label: Employee Login (open text field)

4. Click Save

Upon logout, the SSO button will be visible below the the username/password.

SSO User Creation Settings.

Configuration for multi-environment SSO

If client has 4 environments (Prod, Backup, Dev, Test), settings above will be created once for each environment. Note that these settings will need to be copied over to different instance so as when T2P occurs, all settings are existing and copied over to different environment.

Configuration for two IdP within production instance