Changes

Added the ability to suppress portal pages from appearing in the top header bar. If your system was configured using the '''Deny''' permissions on Portal Pages (formerly called “Main Menu” items) and your intent was to hide items from the main menu bar but link to those pages via a shortcut, you will need to remove the deny permission on those pages and possibly allow access and then turn off the new setting called '''Display As Menu on Portal HeaderLink'''. This must be done after this before the next November 2021 upgrade. To hide a portal page from the header, go to '''Menu Icon''' > '''Global Settings''' > '''Users''' tab > '''Portals''' > Edit the desired portal > Edit the desired '''Portal Page''' and toggle off '''Display As Menu on Portal HeaderLink''' located under the '''Name'''. '''<u>Note:</u>''' After the November 2021 upgrade, the deny permission will be more restrictive and the only way to display or hide items from the header will be to use the new '''Display As Header Link''' toggle.

====Added Additional Fields to Third-Party IRS and CRA VerifciationVerification====

====Improved Searchability of System Emails List ViewEmail Templates====To make it easier to find workflow emails in the '''System EmailsEmail Templates''' list view, additional information was added to the '''Name''' column. You can now search workflow emails on '''Task ID''', '''Workflow ID''', '''Task Number''', and '''Task Description'''. Go to '''Menu Icon''' > '''Global Settings''' > '''Communications''' tab > '''System EmailsEmail Templates'''.

====Added Option a List View Selector to Use Configuration Folders for Portal LogosContact and Organization Lookups====Within Added the portal builder we have added support for selecting list view selector to the single contact lookup button when you are associating contacts or organizations to a Level 1 record such as a grant. This gives your users more flexibility and choice over what data they want to see when they lookup users and display logos from '''Configuration Folders'''organizations. For example, if you are associating reviewers through the lookup, you might want to see different information than if you are associating a co-applicant. To You can see this setting the list view picker if you navigate to a Level 1 record and go to a '''Menu IconLinked Record List''' > , '''Global SettingsContacts''' > tab, or '''UsersOrganization''' tab > and click on the '''PortalsLookup''' > Edit a portalbutton.<!--117211 123656 - Ability to upload logo from Surface list view picker when selecting a configuration folder single contact in portal configurationthe new association entry view-->

====Added Task Types to Company and User Workflows====Added '''Company Association''' task type on company workflows [[File:2021-07-ticket-123656-1.png|thumb|none|800px|Lookup as well as the '''People Association''' task type on user workflows to make it easier to add, update and remove associations. For example, you could use these new workflow options to synchronize organization associations based on an external sourceseen when associating contacts.]]<![[File:2021-07-121539 ticket- People and Company Association tasks for Company & User Workflows123656--> ====Added Confirmation Dialog for List View Exports that Trigger Status Changes or Workflows====Added a confirmation dialog when users export a list view that is configured to run workflows after export2. This is for list views utilizing the settings to '''Update Status After Export''' or '''Trigger Workflow After Export''' found under the '''Export''' tab of png|thumb|none|800px|Lookup window showing the list view builderselector.<!--120167 - Warning pop up for 'Update Status After Export' option in list views-->]]

====Added an E-signature QueueLevel 1 fields to Level 3 List Views====Added an '''E-signature Queue''' where you can see and remove pending e-signature requests from the queueability to surface Level 1 fields such as the status or the amount requested of the grant on a Level 3 sub activity list view. To see You can add Level 1 fields to a Level 3 list view by going to the new queuedesired Level 3 list view, navigate navigating to the '''Menu IconColumns''' > '''Global Settings''' > '''Integrations''' Tabtab in the list view builder and selecting desired level in the field entity dropdown.<!--124465 114400 - Show unfinished e-Signature queue and allow cancel documents from L1 fields on L3 listviews-->

====(Beta) New Grants.Gov IntegrationAbility to Import Custom Lookup Tables====New beta feature that integrates with Grants.gov : ''Main Article: [[Custom Lookup Options]]''Added ability to easily import large data sets for State agenciesuse as options within a select-type custom field. A state agency This can now search the list of opportunities found on Grants.gov from within a UTAbe used to provide large selection sets for your users, such as item inventory codes, code dictionaries, or geographic lookups. You can view also easily setup dynamic sub-filtering conditions across multiple fields. For example, you could set up parent and child fields for selecting the details of an opportunity country, university, faculty, and import courses where the available options for each subsequent field is dependent upon the opportunity as value of a Level 1previous field. Once an opportunity has been imported, This new functionality is advantageous since you can track and manage your internal application process around don't need any of the opportunity data to exist as well records in your system (as track funds with the current '''Enable Dynamic Content''' option within a custom field) and report resultsit will be easier to update the options by importing them rather than editing large amounts of text in the custom field '''Edit''' screen. To import a dataset, go to '''Global Settings''' > '''Custom Lookup Options'''. To configure this beta feature, go to any custom field of the desired type '''UTASelect One – Dropdown''' > , '''Select One - Radio button'''Configuration Settings, or ''' > Lookup - Autocomplete Options'''Connectivityand toggle on ''' tab > Enable Dynamic Content'''Grants.Gov IntegrationThis will reveal a secondary toggle called '''Use Custom Lookup Options'''.<!--123753 124709 - Grants.Gov integrationCustom Lookup Options as Dynamic Content option-->  

====Added Level 1 fields Option to Level 3 List ViewsHold Workflow Emails====Added the ability to surface Level 1 fields such as the status or the amount requested put workflow emails on hold if an excessive number of the grant on emails is being generated per workflow within a Level 3 sub activity list view5-minute span. You can add Level 1 fields to This setting acts as a fail-safe mechanism enforcing a manual review and release process when a Level 3 list view by going to workflow generates emails that exceed the desired Level 3 list viewthreshold you specify. To configure, navigating navigate to the '''ColumnsGlobal Settings''' > '''Communications''' > '''Workflow Email Hold Limit''' tab to specify the maximum number of emails allowed to be generated by a single workflow in a single cycle before all the list view builder generated emails from that workflow are put on hold. You can choose to notify all system administrators or pick specific users to be notified when workflow emails have been put on hold and selecting desired level in the field entity dropdownrequire releasing.<!--114400 127005 - L1 fields Workflow email fail safe on L3 list viewshold limit-->

The setting Added option to open records of a particular status in '''Open Record in Annotation Mode''' is available againby default. If you have a status such as "Revisions Requested” where you have to send the record back to the user for annotations or to respond to annotations, you can now force the record into annotation mode and save the user a click. To configure this, go to the desired '''UTA''' > '''Configuration Settings''' > Pick the desired level (1, 2 or 3) > '''Statuses''' > Edit the desired status > '''Permissions & Availability''' tab > '''Open Record in Annotation Mode'''.

====New Custom Lookup Options====Added a new functionality called '''Use Custom Lookup Options''' to the '''Select One – Dropdown''', '''Select One [[File:2021- Radio button''', and the '''Lookup 07- Autocomplete Options''' custom fields if these fields are set to '''Enable Dynamic Content'''. Custom lookup options can be used for validation based on clientticket-120548-specific data such as a large lookup based on postal/zip codes. The custom lookup options can be used on a standalone parent field or may be utilized with a parent and child dropdown list. For example, each subsequent child field can filter its available options based on its preceding parent option1. png|thumb|none|800px|The '''Custom Lookup Options''' were introduced as an alternative to using an API, custom script, or storing large amounts of data in the UTA level 1/2/3, as the data for the custom lookup options is stored in a separate tableaudit report generated by Adobe Sign.<!--124709 - Custom Lookup Options as Dynamic Content option-->]]

Added ability to display a different logo based on the language of the user. Go to '''Menu Icon''' > '''Global Settings''' > '''Branding''' tab > '''Global Translation Settings'''button.

====Added Security Option to Disable File ServingAuto-Opening Files in Browser====Added a new option to disable file serving for any uploaded files throughout the system including '''SmartFolders'''. If There are situations in which you may wish to serve the setting '''Disable Option to Serve Uploaded Files''' is toggled ON and if an uploaded file is referenced via contents in the linkbrowser, such as for custom CSS stylesheets included in document templates or for instruction manuals you want the user to read onscreen. However, for clients with strict IT security requirements, you now have the ability to disable the browser from serving the file and it will force the file to instead download instead of opening it in the browserdirectly. To see enable this setting navigate , go to '''Menu Icon''' > '''Global Settings''' > '''Security''' tab> Toggle on '''Disable Option to Serve Uploaded Files'''. 

====Added Option Updated Default Autoloader Behavior to Ignore Comment LinesImport Pound Symbols ( # ) for CSV Upload====A new toggle was added The default behavior of the autoloader has been updated for CSV and TXT file types to import lines containing pound symbol ( # ). Previously, a pound symbol at the start of a line would have been ignored as a comment line and not imported. Depending on the format of you imported file, multi-line data containing pound symbol within values, such as an address field, may have also caused issues and been ignored by the autoloader . To force the autoloader to treat values beginning with pound symbol as comments, you will have to turn on a new toggle called '''Ignore comment lines denoted by pound symbol ( # )'''. When this setting is toggled ON, rows ''starting'' with a pound symbol ( # ) will be treated as comments and skipped during processing. You can still process data with pound symbols with this setting ON if you wrap the entry with the pound symbol in quotes (Example: John, Smith,"#123 Peter Street"). If the new setting is OFF, you can now have a pound sign symbol in your data (Example: John, Smith,#123 Peter Street) and it will still be processed as data. To see the new setting, navigate to '''Menu Icon''' > '''Global Settings''' > '''Autoloaders''' > Edit the desired autoloader > '''File Layout''' tab.

<u>'''Note:'''</u> Import wizards do not have this toggle and as such therefore all pound signs are symbols will be treated as data.

Added the ability to set data policies for invitations. For example, you could setup a '''Data Retention''' policy to delete the values of users who were sent an invitation but either did not respond of or declined the invitation. To see the new option, go to '''Menu Icon''' > '''Global Settings''' > '''Security''' tab > '''Data Policies''' > Edit a policy of the type called '''Retention''' and under the '''Entity''' dropdown select '''Invitations'''. The '''Date Field to Compare''' dropdown will also contain a new option called the following options specific to invitations: '''Last Updated''', '''Invite Time''', and '''Response Time'''.

No features are available ====(Beta) New Grants.Gov Integration====New beta feature that integrates with Grants.gov for State agencies. A state agency can now search the list of opportunities found on Grants.gov from within a UTA. You can view the details of an opportunity and import the opportunity as a Level 1. Once an opportunity has been imported, you can track and manage your internal application process around the opportunity as well as track funds and report results. To configure this beta preview this upgradefeature, go to the desired '''UTA''' > '''Configuration Settings''' > '''Connectivity''' tab > '''Grants.Gov Integration'''.<!--123753 - Grants.Gov integration--> [[File:2021-07-ticket-123753-1.png|thumb|none|800px|Optional tab for importing grants.gov applications into a UTA.]]