Revision as of 13:15, 19 May 2022

Overview

A Workflow is a set of repeatable steps used to automate and streamline your business processes within the system (e.g. creating review forms and notifying reviewers via email).

Use case

Once your application hits a specific status, there may be a handful of activities that need to be created or fields that need to be updated in order for the application to move to the next status. By using various workflow tasks, you can have all these tasks completed automatically, simplifying your granting process.

Example

Once an application is moved to the Approved Status - you want to create a payment activity, a few report activities, send an email to the applicant, and update the Approved Date field.

Some applications may have already been in the Approved Status but were sent back for review or updates. In this case, you don't want applications that have already gone through the Approved Status workflow to repeat the tasks listed above once their status is updated to Approved again. In this case, you will configure the workflow to bypass the create new activity and email tasks and only update the Approved Date field.

Configuration - Essentials

Creating a New Workflow

You can create a new workflow by clicking the plus button on the workflows home page.

Add a new workflow

Configuring A Workflow

Select Workflow Type: The type will dictate which information/fields will be available when creating tasks - You can select different UTA’s, levels, contacts, organizations etc… as your workflow type.

Name the workflow and add it to a Category

• Suggested naming convention: UTA, Record Level (1/2/3) - Goal/Status
  • EX: Submission Manager L1 - Approved Status
• Categories are created by your organization. We suggest creating categories based on the UTA and Record Level.
  • EX: Submission  Manager L1

Add a workflow description (optional). 

• Include a list of tasks and branching conditions for ease of review later.
• Add notes to your workflow if you make changes to it.

Set the Trigger-On

• The trigger dictates what status or action will initiate the workflow.
• Depending on the workflow type, you will be selecting from a list of statuses or activities.
• For our example, we will be triggering our workflow when a record hits the Approved status.

Creating Approved Status Workflow - Workflow Main Set-up Page

Tip: You can build a workflow on your production system first and test it on your backup the following day. Make sure to set the Trigger-On to Deactivate so the workflow won’t run. Once your workflow appears in your backup, you can set the Trigger-On to the correct trigger and test your workflow without worrying about impacting your production environment.

Configuration - Advanced

Tasks

• Navigate to the Task tab found on the left side of your screen. 

Creating a Task

Creating The First Task

To create a new task, click on the plus sign button found on the top left corner of your screen (highlighted in image above). 

• We suggest creating all of your workflow tasks before connecting them together. 
• We suggest creating an Acknowledgment as your first task type. 
• Name this task Placeholder. 
  • This task will not have a function but will indicate that a workflow has started. You will be able to see this task listed in the workflow history log on a specific record.

Placeholder Task

Creating The Remaining Tasks 

Task 2 – Create Payment Record

Task Name: Create Payment Record 

Task Type: Create New Activity 

Select the activity type you want to create and the default status the activity should be created in. 

Creating a New Activity Task

Under the scheduling tab → configure the activity to meet your requirements. Not all fields listed in this section need to be configured - it will depend on the activity type.

Start Date / End Date: Choose the date fields that will determine the start and end date of the activity scheduling period.

• You can set the frequency the activity is scheduled - activities will be created immediately, but the date will take the frequency into account. Note that activities will only be automatically scheduled within the time frame set above.
• Select the field from the grant application that contains the grant amount. This value will then be split equally between all payment activities being scheduled.
• You can also select the field where the amount of each payment will be stored - note that the total amount will be divided equally between all of the activities.
• Select the date field that will store the scheduled activity date.

Scheduling Tab

Note: If you do not see a Scheduling Tab → make sure to toggle on advanced options, found near the top right of your screen.

Task 3 - Send Approved Receipt

Task Name: Send Approved Receipt 

Task Type : Acknowledgement 

In this case, you will be using the acknowledgment task to send an email to the applicant. You can specify who the email will be sent to under the Routing section. Select Owner if you want the email to be sent to the applicant. 

Routing a Task

You can configure the email content by navigating to the Message Template tab. 

Message Tab

Here you can specify:

• Message type (instant message or email).
• Email template (can create from scratch or choose an existing template).
• Add a subject to the email template.

You can use the Variable Syntax helper (found in the configuration mode shortcuts list) to test your email template against a record. Copy the email template and paste it into the helper. This will allow you to confirm that you are populating the correct information in your email template. 

• We always suggest saving your email as an event. This will store the email as an event on the user profile.
• You can also add attachments to the email template here.
• To do so you will need to reference a custom field where a document is stored. The format used to reference the field is @#Custom Field ID#@
• You can attach multiple documents. They will need to be delimited by semicolons. 

Attach a file to an email

Task 4 - Create Progress Report

Task Name: Create Progress Report 

Task Type: Create New Activity

Select Progress Report from the activity drop-down and specify the configuration for the new activity under the Scheduling tab (visual example shown in Task 2).

Task 5 - Create Final Report

Task Name: Create Final Report

Task Type: Create New Activity 

Select the Final Report from the activity drop-down. 

In this case you only want to generate a single Final Report, so you will not need to configure any fields under the scheduling tab.

Task 6- Create Contract

Task Name: Create Contract

Task Type: Create New Activity 

In this case you only want to generate a single Contract, so you will not need to configure any fields under the scheduling tab.

You can also generate a contract through the Generate PDF task - but you will not be able to alter the document once the PDF is created. By creating a contract activity, you are able to make adjustments to the contract's content.

Task 7 - Update Approved Date  

Task Name: Update Approved Date 

Task Type: Update Custom Field Value

Select the field you want to update: Date Approved

You can then enter the updated field value below.

If you want to update the field to the current date - enter the following variable - @date(currentdate)@

Update Custom Field Task

Connectors

Now that you have created all of your workflow tasks, you will need to connect them. This can be done by creating Connectors. Workflows will only run tasks if they have been connected together and have applicable conditions to the current record. 

Create a Starting Connector to kick-off your workflow. 

Creating your First Connector

Click the New button on the first row of your workflow tasks. 

Create a new connector

You can leave the Name and Trigger Type as the default for your starting connector.

For the Connect To option - select the task you want the workflow to start with - in this case it will be the Placeholder task.  

Starting connector configuration

→ Typically, tasks should be created in the order they will be executed in, but they can be reordered later if need be. 

Branching Connectors 

Applications that have already been Approved have gone through this workflow before. To make sure a record that has already gone through this workflow does not go through all of the tasks again, you will need to create Branching Connectors. Branching connectors have specific conditions that will allow you to direct records to different tasks based on that condition. 

For this example, the condition will be whether the Approved Date field is blank or not blank.

Create Branching Connectors 

Create a new connector for the placeholder task by clicking the New button beside Task 1. You will need to create as many connectors as conditions. In this case, you will be creating two connectors for this task.

Once you have clicked New - Name the connector based on the condition. In this case we want applications that already have a value in the Approved Date Field to jump tasks 2-5 and go directly to task 6 (Update Date Approved). 

The name for this connector should indicate the condition - in this case we will be naming it Date Approved Not Blank.

The connect to option in this case would need to be Updated Date Approved.

Branching connector configuration

Navigate to the Routing Conditions tab in your connector settings - this is where you can specify which applications will skip certain workflow tasks.

• You can filter by Type, Status, or custom condition. In this case we want to filter by custom condition - Condition: Approved Date Field is Not Blank. 

• The custom condition to check if the field if not blank is - "@Date Approved@"!=""

Branching connector routing conditions

Now you can create a second connector for the placeholder task that routes the applications with a Blank Approved Date Field to task 2 (Create Payment Record). 

Branching connector configuration

For the routing condition - The custom condition will be that the Approved Date field is blank. 

The custom condition to check if the field is blank is “@Date Approved@”-””

Branching connector routing conditions

Now the placeholder task has two connectors with one routing applications with an existing Approved Date to the Update Approved Date task and the other routing applications with no Approved Date to the Create Payment Record task.

Branching Connectors

You will need to create connectors for the remaining tasks. This can be done by clicking the New button for each task. 

Make sure that you connect the current task to the next task you want it to go to. The default is for the connector to connect to Complete - which will end your workflow. 

Connector Configuration

Once you have created connectors for all of the tasks - connect the final task to Complete. 

Connector Configuration

Once you are done creating connectors your workflow should look like this (below).

Connector Configuration

Testing the Workflow

Now that you have built the workflow, you want to make sure that it functions correctly. You can do so by setting a record to the Approved status and checking the workflow history on the record. We would suggest doing this in your backup system so it does not impact your production environment. 

Take a test record and move the status to Approved then click submit. 

Testing your workflow

Navigate to the Logs drop down near the top left of the screen and select the Workflow History option.

Testing your workflow

You will be able to see a list of completed workflow tasks from your workflow here. Make sure the task status is completed for each of your tasks.

Testing your workflow