Smartstaff
1,385
edits
Changes
→User Creation Option (JIT Provisioning)
After the November 2022 upgrade, Service Provider-initiated authentication is now supported. The Service Provider sends the SAML Authorization Request message and forwarding the user to the client Identity Provider service for authentication. The end user will login from the client-side Identity Provider. After the end user has been authenticated, the client Identity Provider service will redirect them back to the SmartSimple instance along with a base64-encoded SAML assertion response. The user's browser will then relay this assertion to the SmartSimple server for SSO authentication.
===Prerequisites===
* You must provide SmartSimple with a public key in base64-encoded X.509 Certificate format for digital signature validation.
===Service Provider Configuration - SmartSimple===
Within SmartSimple, SSO settings are accessed through the '''''Global Setting -> Integration Settings''''' →''''' Integration''' ''tab.
[[File:sso-001.png|thumb|none|600px|Navigating to the SSO configuration.]]
====Mandatory Settings====
* '''SSO Alias''' - used to identify the SSO connection and should be configured by default to be 'SAML2'. If multiple SSO connections are to be configured then you may include an additional element on the client-side assertion named 'SSOModule' to specify the SmartSimple connection by matching a unique "SSO Alias" value.
* '''Unique Identifier Field (UID)''' - used to identify the user account and needs to be an attribute that is unique to each user in SmartSimple. This needs to be an The value for the attribute common to both "NameID" from the SSO assertion should match the value from the SmartSimple and field selected in the client-side system dropdown list.(typically e-mail address or employee ID).
* '''X509Certificate (SAML2 Only)''' - the signing certificate to be provided by the client. The formatting of this should be the certificate value without the "begin certificate" and "end certificate" header and footer lines. Also, depending on how the client-side system sends this value within the SAML assertion the certificate value will typically be formatted to just a single line but could also be multiple lines and so must be entered into SmartSimple in the same format.
* '''Timestamp Time Zone''' - used to read the incoming SSO message timestamp from Identity Provider configured time zone. Default value is "--UTC/GMT--". Settings will need to be adjusted when the error "SAML response expired" is found in the log file during debug mode.
* '''Third-Party Identity Provider'''- specify what SSO authentication method is used (Identity-Provider initiated or Service Provider-initiated)
** '''Endpoint''' - specify the redirect IdP-initiated or SP-Initiated endpoint. This redirect will be rendered in the [[Login Page]].
* It is also recommended to disable the Session Timeout Alert setting within the '''''Global Settings -> ''''' → '''''Security ''' ''section as that feature would not be applicable to users logged in through single sign-on.* By default, SSO acts as an additional method of authentication. If you wish to enforce the use of SSO, and restrict the regular username and password authentication, you can do so with the '''''Global Settings -> ''''' → '''''Integration -> ''''' → '''''Enforce SSO ''''' setting which allows you to restrict a set of user roles to only be able to login through SSO.
====Additional Settings====
* '''Create New User on No MatchBypass Two Factor Authentication''' - create new user [[Multi-Factor Authentication|Bypass Two Factor Authentication]] when no matching is found and will allow login for new user upon successful authenticationlogged in with SSO* '''Create New Organization on No MatchEnable Debug Mode''' - create new parent organization when no matching organization is foundWhen enabled, it ignores the SSO time stamp and output SSO assertion message in the [[Configuration_Error_Log|Congifuration Error Log]] * '''Enable Updates To User RoleDefault Landing Page''' - allow the used to specify an initial landing page within SmartSimple instance. This should be a relative path (e.g. /iface/ex/ax_index.jsp). <!--Ticket#52854 - SSO logout assertion to change userSLO-->* '''Logout Redirect URL'''s system role for new created users and not for existing - redirect url when SSO userslogout* '''Enable Updates To User OrganizationLogout Assertion''' - allow will send a logout assertion to the SSO assertion Identity Provider to change userlog out of that session : Additional settings for ''Enable Logout Assertion'':: 's parent organization''Assertion Target URL''' - target site url: '''Assertion Private Key''' - private key to establish connection with the target site.=====User Creation Option (JIT Provisioning)=====When users need to be created on the fly after SSO authentication, the following configuration settings are available:
=====Optional Attibutes=====
The following optional attributes can be used in the assertion. Please note that they are case sensitive and should be labelled exactly.
* '''SSOModule ''' - used to specify the SmartSimple SSO connection when there are multiple connections configured.* UID - can be used instead of NameID as i.e. "SAML2" for prod, "SSOBK" for backup instance, "SSODEV" for dev instance, "SSOTest" for test instance. Note that the user identifier.attribute name and attribute value are case sensitive * '''Email'''* '''First name'''* '''Last name'''* '''Department ''' - used to update the user's organization. This will attempt to match an organization by name and will move the user to that organization if found.* '''Roles ''' - used to update the user's roles in SmartSimple for new users. This should be a comma delimited list of SmartSimple user roles (by name) to be assigned to the user.* '''Language ''' - used to specify the initial language displayed to the user. This should be an integer value that corresponds with a language ID value in SmartSimple (e.g. 1=English). =====Role Mapping=====<!--Ticket#124791 - SSO to update roles for existing users for a fully federated SSO-->Apply Role Mapping to new and existing users to control user roles within your SmartSimple system. Define the list of system roles you wish to be monitored upon each SSO authentication by a user. With external role mapping enabled, a user's roles within the system will be adjusted according to the role attributes explicitly provided by the assertion. Based upon the role mapping below, the user will be provisioned with all the roles as defined by the assertion attributes, and will also be stripped of any roles that they may currently possess that are listed in this setting but were not defined in the assertion attributes system.* '''Roles to be Monitored '''– define the list of system roles you wish to be monitored upon each SSO authentication by a user* '''Mapping '''– map all roles indicated above to the external role name from the client Identity Provider service Detailed expected behaviour of this settings can be found in Section 4 =====Multi Environment Support=====<!--Ticket# 134892 - Service Provider initiated Single Sign On (SP-initiated SSO)-->When you have multiple environments with unique SSO configurations (such as production, testing, development and backup), group them under the same MES group identifier. This will give you a consistent configuration of your login page across multiple environments. The system will then detect and render the appropriate SSO login link using the MES Environment Identifier.* '''MES Group Identifier''' – assign the same MES Group Identifier name to the SSO configuration for your development, production, testing and backup environments.* '''MES Environment Identifier '''– enter the domain of the SmartSimple environment that will display tis SSO service endpoint on the login page i.e. alias.smartsimple.com or alias.smartsimplebk.com Additional settings to be configured is from the main login page ('''''Waffle''''' → '''''Global Settings''''' → '''''Branding''''' → '''''Login Pages''''') under the Single Sign-On section, select the MES Group Identifier from the dropdown list, and add button label i.e. ''Employee Login''. ====X.509 Certificate on the SP-Initiated SSO====<!-- 148020 - Adding SP x509 signing certificate for SSO metadata and SSO authorization request -->In the July 2023 upgrade, a new feature to support X.509 signing certificate for single sign-on (SSO) authorization requests has been added.If you are using a service provider-initiated SSO, a signed authentication request embedded with the signed value and the X.509 certificate will be sent to the identity provider (IdP).The new setting is located at Global Settings > Integrations tab > Single Sign-on > Edit a SP-initiated SSO and toggle on Sign authentication request sent to identity provider (IdP).
===Identity Provider Configuration - Client-Side System===
The elements required for setup of the client-side identity provider connection are listed below.
* Unique user identifier - within the SAML assertion, this value can be sent in the standard element, or optionally within an element named 'UID'.: "NameID"
* Assertion Consumer Service URL - this will be equal to '/SAML2/' appended to your SmartSimple instance URL, e.g. '''https://alias.smartsimple.com/SAML2/'''.
* Service Provider's Entity ID - this can be the URL to your SmartSimple system, e.g. '''https://alias.smartsimple.com/'''.
* Service Provider metadata XML - the following is an example service provider metadata that can be used, however you must first replace every instance of 'alias.smartsimple.com' instead with the URL to your SmartSimple system.
<pre><?xml version="1.0"?>
<md:EntityDescriptor xmlns:md="urn:oasis:names:tc:SAML:2.0:metadata" xmlns:ds="http://www.w3.org/2000/09/xmldsig#" entityID="https://alias.smartsimple.com/">
<md:SPSSODescriptor AuthnRequestsSigned="false" WantAssertionsSigned="true" protocolSupportEnumeration="urn:oasis:names:tc:SAML:2.0:protocol">
<md:EmailAddress>support@smartsimple.com</md:EmailAddress>
</md:ContactPerson>
</md:EntityDescriptor></pre> The following steps are a high-level approximation and example of how one may setup minimal SSO functionality.Additional steps may be needed for your Identity Provider.These do may constitute recommended best practices, and we recommend you consult the documentation offered by your Identity Provider.
====Active Directory Federation Services(ADFS)====
If using ADFS refer to the below steps as related to SmartSimple for setup. Some steps unrelated to your SmartSimple configuration have been omitted.
* Finish the setup, and then return to the "Claim Rules" editor, and select the "Issuance Transform Rules" tab and add a new rule. Set the "Rule Type" to use the 'Send LDAP Attributes as Claims' template and configure the mapping to the agreed upon user identifier (e.g. LDAP attribute 'E-Mail-Addresses' to Outgoing Claim Type 'NameID'). Depending on your ADFS version and setup you may instead need to create two rules, one to map the attributes E-mail to E-mail, and then a second rule to transform the E-mail to the outgoing NameID.
* To test or use this connection use your internal ADFS URL and specify the loginToRp parameter as the SmartSimple SAML entity ID, e.g. '''https://adfs.yourlocaldomain.com/adfs/ls/idpinitiatedsignon.aspx?loginToRp=https://alias.smartsimple.com/'''.<br/> If you aren't automatically redirected into SmartSimple you may need to have RelayState enabled in ADFS, and then use a RelayState parameter to achieve this, e.g. '''https://adfs.yourlocaldomain.com/adfs/ls/idpinitiatedsignon.aspx?RelayState=RPID%3Dhttps%3A%2F%2Falias.smartsimple.com%2F%26RelayState%3Dhttps%253A%252F%252Falias.smartsimple.com%252F'''.
====Azure Identity Provider====
Configuration items listed are specifics SSO to work in SmartSimple:
* Log into Azure as admin
* Go to Azure Active Directory → Enterprise Application → Create a new application
* Select Non-Gallery Application and then add your new application, enter the name of your application i.e. "SmartSimple SSO" and then press ADD
* Select Single Sign-ON and then select SAML
: '''Basic SAML Configuration:'''
: '''Identifier (Entity ID)''': https://alias.smartsimple.com
: '''Reply URL (Assertion Consumer Service URL)''': https://alias.smartsimple.com/SAML2/
* User Attributes & Claims
: 1. Required claim
:: '''Unique User Identifier (Name ID)''': this can be the user.mail or user.employeeid or any unique identifier in the user profile fields
: 2. Additional claims - additional attributes are needed when user will be created on the fly
:: '''First name''': user.givenname
:: '''Last name''': user.lastname
:: '''Email''': user.mail
:: '''Department''': user.department
:: '''Roles''': user.assignedroles
:: '''SSOModule''': constant value that is going to be used in the SmartSimple configuration "SSO Alias"
: Note that all attribute names are case sensitive and should be named as indicated above. First name, Last name and Email are mandatory to create a new user.
* To test, go to ''Single sign-on'', click on ''Test this application'' from the tab header. Select "''Sign in as current user''" and click on the ''Test sign in'' button. Please make sure that the current user is existing in the SmartSimple instance to have a successful SSO login.
After configuration has been completed, provide the following to SmartSimple:
# x509 certificate - download the ''Federation Metadata XML (''Found under ''Single Sign-on'' → ''SAML Certificates'')
# Value used for the NameID - this will be used as the identifier between SP and IdP
# URL Redirect
#* "User Access URL" for IdP-initiated SSO (Found under "''Properties''")
#* "Login URL" for SP-initiated SSO (Found under ''Single Sign-on'' → ''Set up 'Application Name')''
====OKTA====
* Log in to OKTA admin account
* Click on the '''Application''' tab and select Applications.
* Click on the '''Add Application''' button and click on''' Create New App''' to create a new application for SmartSimple.
* Set the '''Platform''' as '''Web''', the '''Sign on method''' as '''SAML 2.0''' and Create a new application.
* In the '''General Settings''' page, provide a name for the application i.e. SmartSimple SSO
* In the '''Configure SAML''' tab, under SAML Settings,
** '''Single sign-on URL''': https://alias.smartsimple.com/SAML2/
*** check on the tick box: Use this for Recipient URL and Destination URL
** '''Recipient URL''': https://alias.smartsimple.com/SAML2/
** '''Destination URL''': https://alias.smartsimple.com/SAML2/
** '''Audience URI (SP Entity ID)''': https://alias.smartsimple.com/SAML2/
** '''Default RelayState''':
** '''Name ID format''': EmailAddress
** '''Application username''': Email
* Configuration Settings below have default value:
** '''Update application username on''': Create and update
** '''Response''': SIgned
** '''Assertion Signature''': Signed
** '''Signature Algorithm''' RSA-SHA256
** '''Digest Algorithm''': SHA256
** '''Assertion Encryption''': Unencrypted
* '''Attribute Statements'''
** '''First name''': user.firstName
** '''Last name''': user.lastName
** '''Email''': user.email
** '''Department'''
** '''Roles'''
** '''SSOModule'''
Note that all attribute names are case sensitive and should be named as indicated above. First name, Last name and Email are mandatory to create a new user.
After configuration in OKTA has been completed, provide the following to SmartSimple:
# x509 certificate - found under ''Sign On'' tab, SAML Set up "''View SAML set up instructions''"
# Value used for the NameID - this will be used as the identifier between SP and IdP
# URL Redirect - "Embed Link" for IdP-initiated SSO (Found under "''General''" tab in the "''App Embed Link''" Section)
===SAML Assertion Example===
<div id="mw-content-text" lang="en-GB" dir="ltr" class="mw-content-ltr">
<pre><?xmlversion="1.0" encoding="UTF-8"?>
<samlp:Response xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol" Destination="https://alias.smartsimple.com/SAML2/" IssueInstant="2014-07-12T14:17:03.063Z" ID="BYavZkuNtRHC5rEPhIAEQrys1Wb" Version="2.0">
</saml:AuthnStatement>
<saml:AttributeStatement xmlns:xs="http://www.w3.org/2001/XMLSchema">
<saml:Attribute NameFormat="urn:oasis:names:tc:SAML:2.0:attrname-format:basic" Name="Email">
<saml:AttributeValue xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="xs:string">david@email.com</saml:AttributeValue>
</samlp:Response>
</pre></div>
===SAML Authorization Request Example===
Example below is sent by the Service Provider (SmartSimple) to the Identity Provider in the SP-SSO initiated flow.
<div id="mw-content-text" lang="en-GB" dir="ltr" class="mw-content-ltr">
<pre>
<?xml version="1.0" encoding="UTF-8"?>
<samlp:AuthnRequest xmlns:samlp="urn:oasis:names:tc:SAML:2.0:protocol" xmlns:saml="urn:oasis:names:tc:SAML:2.0:assertion" AssertionConsumerServiceURL="https://alias.smartsimpleqa.com/SAML2/" Destination="https://adfs.yourlocaldomain.com/adfs/ls/spinitiatedsignon" ID="alias.smartsimple.com_QADEV_6CD95AEAD41525F565318B82A46B022E" IssueInstant="2023-01-05T13:56:36Z" ProtocolBinding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" ProviderName="aliasname" Version="2.0">
<saml:Issuer>https://alias.smartsimple.com</saml:Issuer>
<samlp:NameIDPolicy AllowCreate="true" Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified"/>
<samlp:RequestedAuthnContext Comparison="exact">
<saml:AuthnContextClassRef>urn:oasis:names:tc:SAML:2.0:ac:classes:PasswordProtectedTransport</saml:AuthnContextClassRef>
</samlp:RequestedAuthnContext>
</samlp:AuthnRequest>
</pre></div>
==Adding URL Redirect in the Login Page==From the [[Login Page]], the SSO URL redirect can be added to redirect internal users to the client's Identity Provider login page. To configure, go to 1. Waffle → Global Settings → Branding → Login Pages 2. From the Login Pages listview, select the default login page to add the SSO URL redirect to. 3. Go to the Singe Sign-On section, select the MES Group Identifier and add the Link Label i.e. Employee Login 4. Click Save Variables to use in a custom page layout: * @ssodisplaylink@ - the variable to use to add the Link Label and hyperlink in the login template * @ssotargetlink@ - the variable to use to retrieve the SSO login URL<br /> <br /> ==Troubleshooting==In order to retrieve information about why SSO is failing, first toggle the "Debug Mode" option within the SSO configuration in SmartSimple, and then test the SSO in order to generate log data within the Configuration Error Log. * '''SAML failed. No user account found''' : This means that a corresponding active user was not found in the SmartSimple instance. Check the [Unique Identifier Field] that is configured in the SSO setting, and then compare the value of the "NameID" node sent within the SAML assertion to see if a user with that field value exists in SmartSimple. Check that the user is activated and allows login.* '''SAML failed. Login session is null / Invalid SAML Response''' : Check that a matching user account exist: Check x509 certificate: Verify that the endpoint in the SSO assertion is correct. There should be a Response node with a parameter like Destination="https://alias.smartsimple.com/SAML2/"* '''SAML signature validation failed''' : This means that the x509 certificate does not match between the SAML Assertion and the value configured in the instance SSO settings.* '''SAML response expired''' : Check the datetime value of the parameter named ''NotAfter'' and ''NotBefore'' within the SAML Assertion and compare these with the expected datetime that the assertion was sent. It is possible to adjust the '''Timestamp Time Zone''' dropdown settings.* '''Invalid response format. Unparseable date'''. : Check that the SAML Assertion contains both parameters: ''NotAfter'' and ''NotBefore''* '''SAML processing error''' : Check that the value for the ''SSO Alias'' is "SAML2" for SSO in production instance: If it is for a Multi Environment, value in the ''SSO Alias'' should be the value in the attribute ''SSOModule''* '''No log file is found in SmartSimple''' : Verify the parameter: Destination="https://alias.smartsimple.com/SAML2/" from the SSO Assertion.: Check that the value for the ''SSO Alias'' is "SAML2" for SSO in production instance.: If it is for a Multi Environment, value in the ''SSO Alias'' should be the value in the attribute ''SSOModule''* '''After logging thru SSO, you are redirected to "mesagetype=30"''' : Verify that the alias of the instance is correct. To verify the alias, go to '''''Waffle''''' → '''''Global Settings''''' → '''''Branding''''' → '''''Web Alias'''''. Make sure that the Web Alias value is the same as the domain alias.* '''SAML InReponseTo does not match any of the possible Request IDs''' : Verify the alias of the instance is correct.: Verify that the SSO configuration for multiple environment do not have duplicate MES Environment Identifier. ==Expected Behaviour for Role Mapping==<!--Ticket#124791 - SSO to update roles for existing users for a fully federated SSO-->'''Scenerio 1: ''User Access Mapping'' set to ''Disabled'' / ''Create New User'' on ''No Match'' is ''OFF'''''* User will not be created if user does not exist in the SmartSimple instance* Only existing users in the SmartSimple instance will be able to login and no role/status updates for existing users '''Scenerio 2: ''User Access Mapping'' set to ''Disabled'' / ''Create New User'' on ''No Match'' is ''ON'' ''' * User will be created with default new user role / default new user status settings if users does not exist in the SmartSimple instance* No role updates based on default new user role / default new user status if user exists '''Scenerio 3: ''User Access Mapping'' set to ''Enabled'' / ''Create New User'' on ''No Match'' is ''OFF'' / No Assertion defined ''' * User will not be created if user does not exist in the SmartSimple instance* No role updates if accessing SSO with existing users '''Scenerio 4: ''User Access Mapping'' set to ''Enabled'' / ''Create New User'' on ''No Match'' is ''OFF'' / Assertion is defined ''' * User will not be created if user does not exist in the SmartSimple instance* No role updates if accessing with existing account* No role updates if it is not referenced in the defined assertion* Role updates if accessing with existing account only if they are defined in the ''User Roles Assertion Mapping''. Role update will be based on the mappings defined under ''Mapping''. '''Scenerio 5: ''User Access Mapping'' set to ''Enabled'' / ''Create New User'' on ''No Match'' is ''ON'' / No Assertion defined''' * User will be created with default new user role / default new user status settings if user does not exist in the SmartSimple instance* No role updates if accessing with existing account that does not have roles defined in the ''User Roles Assertion Mapping'' '''Scenerio 6: ''User Access Mapping'' set to ''Enabled'' / ''Create New User'' on ''No Match'' is ''ON'' / Assertion is defined ''' * User will be created with roles defined in the assertion if user does not exists in the SmartSimple instance and assertion roles are defined in the ''User Roles Assertion Mapping''* User role updates based on the defined assertion if accessing with existing accounts that has roles defined in the assertion* No role updates if accessing with existing accounts that has no roles defined in the assertion or if roles in assertion was not mapped in the ''User Roles Assertion Mapping'' '''Scenerio 7: ''User Access Mapping'' set to ''Classic Mode'' / ''Create New User'' on ''No Match'' is ''ON'' / No Assertion is defined''' * User will be created with default new user role / default new user status settings if user does not exist in the SmartSimple instance* No role updates if accessing with user account that already exists in the SmartSimple instance '''Scenerio 8: ''User Access Mapping'' set to ''Classic Mode'' / ''Create New User'' on ''No Match'' is ''ON'' / Assertion is defined''' * User will be created with roles defined in the assertion if user does not exist in the SmartSimple instance and assertion roles are defined in the ''User Roles Assertion Mapping''* User will be created with default new user role / default new user status settings if user does not exists in the SmartSimple instance and if assertion roles do not exist in the ''User Roles Assertion Mapping''* When Access Mapping is set to Classic Mode and there is no mapping section, role updates will only happen in user creation and the roles in assertion has to have the same user role names matching value with the SmartSimple role names. ==Example of SSO configuration in SmartSimple=====Configuration for SSO in production instance===SmartSimple SSO Configuration as the Service Provider in the client's SmartSimple production instance. '''A. SSO Configuration''' 1. Navigate to '''Global Settings''' → '''Integrations''' tab → '''Single Sign-On''' section 2. Click on the “'''+'''” icon to create a new SSO configuration on the instance 3. Fill out the mandatory fields: : '''SSO Alias''': '''''SAML2''''' (default alias for production instance): '''Signing Certificate (X.509)''': cut and paste the x509 certificate after configuration of the client's Identity Provider: '''Timestamp Time Zone''': '''''--UTC/GMT--''''' (default from the dropdown): '''MES Group Identifier''': '''''SSOProd''''' (open text field): '''MES Environment Identifier''': '''''alias.smartsimple.com''''' (client's url production instance): '''Method''': '''''Identity Provider-initiated''''' (default setting): '''Identity Provider Service Endpoint''': this is the url login redirect.:: For Azure, the value in '''''User Access URL''''' (Found under '''''Properties'''''):: For OKTA, the value in '''''Embed Link''''' (Found under '''''General''''' tab in the '''''App Embed Link''''' Section):: For ADFS, the redirect is '''''https://adfs.yourlocaldomain.com/adfs/ls/idpinitiatedsignon.aspx?loginToRp=https://alias.smartsimple.com/''''': '''Unique Identifier FIeld (UID)''': from the dropdown, select '''''*E-Mail''''' (Default value but it can also be the Employee ID or any unique identifier in the user profile): '''Bypass Multi-Factor Authentication (MFA)''': enabled4. Click Save'''B. Login Page Configuration''' 1. Navigate to '''Global Settings''' → '''Branding''' tab → '''Login Pages''' section 2. From the '''Primary''' tab, click on the pencil icon for the first item on the list view - the default Login Page 3. From the '''General''' tab, go to the '''Single Sign-On''' section and complete fields: : '''MES Group Identifier''': from the dropdown, select '''''SSOProd''''': '''Link Label''': '''''Employee Login''''' (open text field)4. Click SaveUpon logout, the SSO button will be visible below the the username/password. [[File:SSO_Login.png|thumb|none|300px|SSO User Creation Settings.]] ===Configuration for multi-environment SSO===If client has 4 environments (Prod, Backup, Dev, Test), settings above will be created one for each environment. Note that these settings will need to be copied over to different instances so as when T2P occurs, all settings are existing and copied over and no editing is necessary after T2P. {| class="wikitable"|-!| !|SSO Alias!|Description!|MES Group Identifier!|MES Environment Identifier|-||1||<span style="color: #ff0000;">SAML2</span>||This is used for production instance||SSOID1||alias.smartsimple.com|-||2||BKSSO||SSO for backup instance||SSOID1||alias.smartsimplebk.com|-||3||DevSSO||SSO for DEV instance||SSOID1||alias-dev.smartsimple.com|-||4||TestSSO||SSO for TEST instance||SSOID1||alias-test.smartsimple.com|} Notes: 1. All columns above are open text fields and can be renamed as desired. Item 1's alias name is the only default/required value for prod. 2. For items 2 to 4, the attribute name "'''''SSOModule'''''" with the '''''SSO Alias''''' value should be included in the Identity Provider configuration. Note that the SSO Alias is case sensitive and should be labelled exactly. 3. From the Login Page, the MES Group Identifier will be the same as shown "'''''SSOID1'''''". It will redirect to the correct Redirect URL Endpoint as it will recognize what instance the user is trying to use the SSO in. ===Configuration for two IdP within production instance===Example configuration below is when a client has two existing Identity Provider Services. All SSO configuration below are used for client's production instance: {| class="wikitable"|-!| !|SSO Alias!|Description!|MES Group Identifier!|MES Environment Identifier|-||1||<span style="color: #ff0000;">SAML2</span>||IdP Service 1||SSOID1||alias.smartsimple.com|-||2||SSOProd2||IdP Service 2||SSOID2||alias.smartsimple.com|} Notes: 1. Item 1 is for client's first Identity Provider Service. 2.Item 2 is the second configuration for the client's second Identity Provider Service. The attribute name "'''''SSOModule'''''" with the '''''SSO Alias''''' value should be included in the Identity Provider configuration. Note that the SSO Alias is case sensitive and should be labelled exactly. [[Category:Integration]][[Category:System Integration]]
[[Category:Identity and Access Management]]
[[Category:Security]]