Difference between revisions of "UTA Calendar Template"

Revision as of 07:57, 27 September 2013

Level 2s associated with a Level 1 in a UTA can be displayed in a SmartSimple calendar format. The setting to define the template used for the calendar display of the Level 2 activities is on the UTA Settings - Miscellaneous tab. The fields and values to be displayed on the calendar can be customized using the UTA Calendar Template.

To enable the UTA Calendar, go to the UTA Settings - Entity tab and check off the "Enable Calendar" option.

link=

By default, the template used for the calendar entries will show the Start Time, End Time and Parent name standard fields, as follows:

If the following settings are entered into the UTA Calendar Template...

...the Calendar entries will appear as follows:

Note: entering a new UTA Calendar Template will overwrite the existing default template.

The calendar entries can be color-coded using either the color settings on the type or the status of the listed Level 2 activities. This setting is made on the UTA Settings - Entity tab.

Examples of Configuration

This template supports the web page view variables including sslogic.

Example: Presume a Level 2 Type called Site Visits, and a custom field on that Level 2 Type called Site Location with a custom field ID of 12345.
You can use the following syntax on the "Calendar Fields" section of the Miscellaneous tab of the UTA Settings Page:

<!--@sslogic('@type@'='Site Visits')-->@#12345#@

<!--@end-->

This will only display the Site Location field (field ID 12345) for Site Visits Level 2 type activities on the Level 1 calendar.

With multiple conditions:

<!--@sslogic('@type@'='Site Visits' and '@statusname@'!='Closed')-->@#12345#@

<!--@end-->

Will do the same as above, but only if the Status of the Level 2 item is not Closed.

Level 1 fields can be included using @parent.fieldname@

See Also

• The Web Page View Field Variables page for the full list of variables supported.
• SSlogic
• UTA Settings - Miscellaneous